Products - Rocker Arms, Shaft, Stud, and Pedestal Mount
Valvetrain Stabilizer Kits
Fuel Rail Kits

Scorpion Racing Products is proud to offer American Made Rocker Arms for your American Made Muscle Car!  We make Shaft, Stud, and Pedestal Mount Rockers for most applications.

Made in the USA! That says it all!

*EXCLUSIVE Lifetime Warranty

Join Us at the PRI Tradeshow in Indianapolis December 10 - 12, 2020

Join Us at the Performance Racing Industry Tradeshow in Indianapolis December 10 – 12, 2020

Scorpion Race Series Rocker Arms

RACE SERIES

• Available ratios

1.6, 1.7 & 1.8 AMC
1.3 thru 1.8 Chevy
1.5 thru 1.83 Ford
1.6 & 1.7 Oldsmobile
1.5 & 1.65 Pontiac
• Handle .950” lift & 950 lbs. max open spring pressure
• Clear 1.625” valve springs
• 1.6” fulcrum width

LS RACE SERIES

• Available ratios 1.7 & 1.8 Chevy LS
• The only ‘No Machining Required’ kit in production
• Use standard length pushrods
• No need for valve cover spacers

NARROW BODY RACE SERIES

• Available ratios 1.5, 1.6 & 1.7
• Designed for center bolt valve covers on Chevy
• Must use a guide plate
• 1.2” fulcrum width

NARROW BODY SELF ALIGNING RACE SERIES

• Available ratios 1.3 thru 1.7 Chevy
• The only one-piece nose roller on the market
• Designed for center bolt valve covers on Chevy
• Self-aligning eliminates the need for guide plate

ENDURANCE SERIES

Endurance Series rockers have Race Series features PLUS:

• Lighter weight for faster RPM gain - average 28 grams lighter than Race Series rocker arms
• Lower profile than Race Series rocker arms for better fitment under most stock valve covers
• Shorter polylocks than Race Series polylocks for better valve cover clearance
• Handle .750” lift & 750 lbs. max open spring pressure
• NEW Adjustable Pedestal Mount rocker arms

MARINE ENDURANCE SERIES

Marine Endurance Series rockers have all Endurance Series features but are shaped specifically for marine engine applications.

Top rear corners angle-cut to clear marine style valve covers
Developed, tested and proven in marine racing applications

Scorpion Racing Products Shaft Mount

ENDURANCE SERIES SHAFT MOUNT

• Many ratios available
• Fully radiused 7000 series aluminum rocker bodies
• All steel rocker parts made from ASTM-certified bearing quality steel
• 4140 heat treated steel stands
• .562” diameter centerless ground shafts
• .625” adjuster engagement
• Each lightened assembled shaft rocker weighs approximately 120 grams

High Performance Scorpion Fuel Rail Kits from Scorpion Racing Products!

Scorpion Fuel Rail Kits

More Volume = More Horsepower!

  • Complete with mounting brackets and stainless steel hardware
  • Custom-made tapered fuel fittings, includes Viton O-rings

Made in the USA! That says it all!

Scorpion Racing Products Valve Train Stabilizer Kits

Valve Train Stabilizer ‘Stud Girdle’ Kits include VTS Polylocks made from precision-ground 4140 steel with black oxide finish. For stock stud spacing only.

Scorpion Racing Products Rocker Arm Features

Race Series vs. Endurance Series

Scorpion Racing Products offers you a choice for top quality roller rocker arms.
Made for the most demanding street and racing applications, Scorpion’s Race Series and Endurance Series Roller Rocker Arms provide superior performance and more horsepower.

Scorpion Race Series Rocker Arms

RACE SERIES
ROLLER ROCKER ARMS FEATURE:

  • Full body design
  • Many ratios available
  • Clear 1.625” OD valve springs
  • Handle .950” lift & 950 lbs max open spring pressure
  • Aerospace-grade 7000 Series aluminum bodies
  • Precision ground needle bearings
  • Centerless ground fulcrum
  • Roller tip and pin
  • Anodized for additional protection and durability

Scorpion Racing Products Endurance Series Rocker Arms

ENDURANCE SERIES

ROLLER ROCKER ARMS HAVE RACE SERIES FEATURES PLUS:

  • Lighter weight for rapid RPM gain –
  • 28 grams (average) lighter than Race Series rocker arms
  • Lower profile than Race Series rocker arms for better fitment under most stock valve covers
  • Shorter polylocks than Race Series rocker arms for better valve cover clearance
  • Handle .750” lift & 750 lbs max open spring pressure
  • Anodized for additional protection and durability